+90 312 847 52 00
Conveyor Belt Flow Control and Adjustable Dosing Systems (Belt Scales)

Conveyor Belt Flow Control and Adjustable Dosing Systems (Belt Scales)

  • It has a main control panel with Color Graphics 4.2” LCD display, microprocessor with two channel I/O boards.
  • It is equipped with 2 load cell mounting groups to be placed on a single idler group chassis.
  • There is a digital speed sensor,
  • It is delivered with mounting accessories.
  • The control panel has digital structure. The options on it are in the form of icons and are also visible in sunlight at a certain distance.
  • There is a USB connection inside the control panel. Calibration and production information can be stored with the USB Disk connected to the USB input.
  • The power supply of the control panel is inside its own board.
  • Instant passing material quantity and total material quantity up to that moment and belt speed information can be displayed on the control screen.
  • Zero calibration can be performed via the control panel and span settings can be entered.
  • The control panel has an error reporting feature.
  • There is an Ethernet Connection (Modbus TCP, FTP) without a converter in the control panel.
  • The control panel also outputs two 4 – 20 mA output signals.
  • There is also an RS-232 output as standard on the control panel. By this means, all information can be sent to a printer, a PC or display (remote viewing screen).
  • Thanks to the programmable digital inputs and outputs located on the I/O board available in the system, a connection can be made to the PLC Automation system or another device located outside.
  • It is very easy to assemble. Can be made by using your idler chassis.
  • It is not a problem if your conveyor belt is angled.
  • It has the limitations given in IP 65 standards
  • Our recommended system has a sensitivity value between 0.5% and 1%. (It may vary depending on the installation location.)
  • Our system makes its own automatic calibration for many years by checking itself, after the first run calibration
  • With an Optional Angle Sensor, it takes accurate measurements on Moving Belts at the time of movement or even if the conveyor angle changes.
© 2021 Yünel Elektromekanik Sistem ve Tesisleri. All Rights Reserved.